Riboflavin Testing as Equipment Development Tool (1) Bellows

Bellows CIP Development Test Setup for Riboflavin Testing

Riboflavin Testing

Bellows CIP Development Test Setup

The objective of the project was to develop a means of cleaning the inside of a bellows at the discharge end of a 4″ OD St St duct or pipe.┬áThe bellows provided for evaluation was fitted with flanges.

To make the bellows available for riboflavin testing it was clamped between two St St plates, the bottom plate being welded to a short length of 4″ OD tube fitted with nozzles for two opposing bubble sprays.